GIRJE

Cutting Oil



GIRJE SYNTHETIC CUTTING OIL is semi-synthetic cutting fluid that is completely water-soluble. It is supplied as a concentrate that consists of carefully selected rust preventive additives and other performance improvers in a water solution. The concentrate should be diluted in the ratio of 2- 5% in water. The resultant solution provides exceptional antirust & cooling properties when used in grinding and other high speed machining operations. It is highly resistant to bacterial attack and provides long life inuse.



RECOMANDED CONCENTRATION:-

  • Normal Machining operation- 4% to5%
  • Difficult Machining operation-10%
  • Grinding operation- 2% to4%


PROPERTIES:-

  • Biostable technology provides excellent sump life & microbiologicalresistance.
  • Exceptionalanti-rust
  • Better emulsion stable in below 50 ppmwater
  • Coolingproperties
  • Cost Effectiveformulation
  • Good compatibility with sealingmaterials

GIRJE

 

Test Properties

Test Method

Specification


Appearance Visual Bright & Clear
Nature of Emulsion Visual Translucent
Density @ 29.5, °C, g/ml, Min ASTM D 1298 1.0
Emulsion Stability in 400 ppm water IS 1448 P – 98/99 Passes
pH of 5%solution Internal 8 - 12
Refractive Index Factor % Brix 1.48
Cast Iron corrosion 3% in 400 ppm water IS 1115 Passes
Packaging Options: GIRJE Synthetic Cutting Oil is offered in 20, 50 & 210 Liter.

Health & Safety: See corresponding product MSDS

The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. In submitting this information, no liability is assumed or license or other rights express or implied given with respect to any existing or pending patent, patent applications or trademarks. The observance of all legal regulations and patents is the responsibilityof theuser.